Weitech Solar Snake Repeller Vibrations

Weitech solar snakes and lizards repeller Repels snakes and lizards With integrated solar panel Protects an area of ​​450 to 650 m² Works with the help of vibrations The anti-impact device on solar energy repels snakes by sending a pulse that the snakes perceive as a vibration that transferred by the ground. Snakes then see a danger zone that prompts them to leave the area. The snake repeller sends its signal over a distance of approx. 20 m in all directions. The devices can be spaced approx. 40 m apart for optimal coverage. Two or more devices are recommended for best results. installation1. Press ON under the device head, connect the small connectors on the cables from the base of the device to the mandrel and attach the mandrel to the device head. 2. Push the spike into the ground, taking care not to damage the device. The spike should be pressed down firmly - the base of the head should be at least an inch - two inches above the ground. 3. You can see the device is operating when the LED flashes during signal transmission and you notice vibrations.4. After initial setup, the device may need to be in the sun for a short time to charge and start. If the device stops working, check / replace the rechargeable batteries. If the battery charge gets too low (due to lack of sun), it regulates itself to make sure the signals are given correctly. Occasionally, snakes that have their usual hiding place nearby can get used to the devices and slowly approach the protected area. If this happens, the devices should be moved 3 to 4 m every 2 to 3 months.